Thursday, April 18, 2024

Understanding Pharmaceutical Liquid Dosage Forms

by | June 29, 2023 12

ii. Monophasic liquid dosage forms for external use

This class includes liquid preparation such as lotions, liniments and collodions

a. Lotions

Lotions are solutions, but may also be suspensions or emulsions, intended for external application to the skin. They are rubbed on the skin without friction with the help of some absorbent material such as cotton, wool or gauze soaked in it. In some cases, lotions are applied to the scalp, where the vehicle for the medication is alcohol based, allowing for rapid drying of the hair and thus making the product more acceptable to the patient (e.g. Salicylic Acid Lotion 2% BPC). In these cases, problems of flammability are addressed by suitable labelling.

b. Liniments

Liniments are liquid preparation intended to be rubbed with friction and massaged onto unbroken skin to obtain analgesic, rubefacient or generally stimulating effects. They are usually solutions of oils, alcohols or soaps, but may be formulated as emulsions.

c. Collodions

Collodions are principally solutions of pyroxylin in a vehicle of ether and alcohol that are intended to be painted onto the skin using a brush or rod and left to dry. When dry, the collodion leaves a protective film covering the site. Collodions are highly volatile and highly flammable and care should be taken to label any preparation appropriately.

iii. Monophasic liquid dosage forms for special use

These include

a. Gargles

Gargles are aqueous solutions containing antiseptics, antibiotics, and/or anaesthetics that are intended for prevention or treatment of throat infections. They are generally formulated in a concentrated form.

b. Mouthwashes

These are aqueous solutions with pleasant taste and odour intended for local treatment of the membranous lining of the mouth and gums. They generally contain antibacterial agents, alcohol, glycerine, sweetening agents, flavouring agents and colouring agents.

c. Throat paints

Throat paints are viscous liquid preparations that are applied with the help of a brush to the mucosa of the mouth or throat. Glycerine is commonly used as a base in throat paints because it possesses a sweet taste and it adheres to mucous membrane for a long period.

d. Eye drops

These are sterile solution or suspensions of drugs that are instilled into the eye with a dropper. The eye drops are usually made in aqueous vehicle. It should be isotonic with lachrymal secretions, buffered and free from foreign particles to avoid irritation to the eye.

e. Eye lotions

Eye lotions are sterile aqueous solutions used for washing the eye. They are supplied in concentrated form and are required to be diluted with warm water immediately before use. Eye lotions are generally used to remove foreign substances from the eye.

f. Ear drops

These are medicated solutions of drugs that are instilled in to the ear with a dropper. These are generally used for cleaning the ear, softening the wax and for treating the mild infections.

g. Nasal drops and sprays

Nasal drops are solutions of drugs that are instilled into the nostrils with the help of a dropper. Nasal sprays are the same preparations as nasal drops but instilled into the nostrils in the form of a spray. Both formulations intended for administration to the nasal cavities to obtain a systemic or local effect.

h. Douches

Douches are liquid preparations used to cleanse deodorize, soothe or medicate wounds, body orifices or cavities.

i. Enemas

Enemas are liquid preparations often formulated as solutions (though they may be presented as an emulsion or suspension) and are intended for rectal administration. They are used for cleansing, therapeutic or diagnostic purposes.

j. Inhalations

They are preparations containing volatile substances. They are used to relieve congestion and inflammation of the respiratory tract. They are added to hot water and the vapours are inhaled.

k. Aerosols

Aerosols are liquid preparations dissolved in a solvent. The solvent is a gas. It is delivered in the form of a spray. It is mainly used for treating asthma and also for migraine.

iv. Parenteral Solutions (Injections)

Parenteral solutions are sterile drug solutions intended for administration by needle or pressure syringe. Drugs may be injected into most any vessel or tissue of the body, but the most common routes are intravenous (IV), intramuscular (IM), and subcutaneous (SC).

Parenteral solutions may be small-volume injections, packaged in ampules for single-dose administration, or vials for multiple-dose injections. Large-volume parenterals containing 100 mL to 1 litre of fluid, are intended for the slow intravenous administration (or infusion) of medications and/or nutrients in the institutional or home care setting.

2. Biphasic liquid dosage forms

Image showing examples of biphasic liquid dosage forms

Biphasic liquid dosage form is one which contains two phases. A good example of such liquid dosage form is suspensions and emulsions.

i. Suspensions

Suspensions are biphasic liquid dosage forms containing essentially insoluble finely divided solid particles or drug(s) suspended with the help of a suspending agent(s) in a liquid medium. The solid particles act as disperse phase whereas liquid acts as a continuous phase.

Read more on Pharmaceutical Suspension

ii. Emulsions

An emulsion is a biphasic liquid preparation containing two immiscible liquids (usually oil and water) one of which is dispersed as minute globules into the other and rendered homogeneous by the addition of an emulsifying agent. The liquid which is converted into minute globules is called the disperse phase and the liquid in which the globules are dispersed is called the continuous phase.

Emulsions are of two types

  1. Oil in water type (O/W): Emulsion in which oil is in the dispersed phase whereas water is in the continuous phase.
  2. Water in oil type (W/O): Emulsion in which water is in the dispersed phase whereas oil is in continuous phase.

To continue reading, click on the page buttons below…

Page 2 of 3Prev123Next


Comments12

  1. Loudon Silwamba says:

    helpful information especially in the manufacturing industry

  2. Abdul Rahman says:

    Hi, thank you for the useful and helpful information.

    I’d just like to ask the reason for classifying mixtures under Monophasic, since some of the formulation mentioned under Mixtures are not solutions but exists in two separate parts.

    Many thanks.

    • Pharmapproach says:

      Hello Abdul, Thanks for your question. The type of mixtures classified as monophasic liquids mixtures in which the composition is uniform throughout the mixture (homogenous mixtures). Unlike heterogeneous mixtures in which the composition is not uniform throughout the mixture, homogeneous mixtures appear uniform, regardless of where you sample it.

      I really apologize for my delayed response.

  3. Letus says:

    i would like to know properties, advantages and disadvantages of pharmaceutical liquids and their storage. but the website is very informative thank you

  4. fredrick appiah says:

    thanks for this info, you just finished my project work. I wanted the advantages and disadvantages but I found the link from the other comment. thank you

  5. Aliodin Damsah says:

    Hi, thank you for the useful and helpful information for me to guide my students.

  6. ahmed says:

    Thank you very much for the valuable information. I wish you happy days

Leave a Reply

Your email address will not be published. Required fields are marked *

x